Next, lightly sand the back of all the tiles so the glue has a stronger hold. Using the E-6000 (in a well ventilated area), put an even layer of glue on the back side of the first tile. Glue it to the upper right hand corner of the cork making sure the top and right edge is flush with the cork. Take the glue and run it along the right side of the tile you just placed. Be sure not to use too much. Glue the back of the second tile and place the it to the right of the first. Squeeze the tiles tightly together. If the glue oozes out the top or sides wipe it off carefully with a paper towel. Glue the remaining tiles in place, remember to place a bead of glue between the edges of the tiles that are adjacent to each other. Let the tiles dry overnight. Trim off the edges of the cork and pour yourself a drink!